Home > Products > WELDERS > All products >

250 amp pulse mig welder for ALUMINUM welding ALUMIG-250P

250 amp pulse mig welder for ALUMINUM welding ALUMIG-250P

250 amp pulse mig welder for ALUMINUM welding ALUMIG-250P
250 amp pulse mig welder for ALUMINUM welding ALUMIG-250P250 amp pulse mig welder for ALUMINUM welding ALUMIG-250P250 amp pulse mig welder for ALUMINUM welding ALUMIG-250P250 amp pulse mig welder for ALUMINUM welding ALUMIG-250P250 amp pulse mig welder for ALUMINUM welding ALUMIG-250P
CategoriesAll products
AlbumView larger image
BrandTOPWELL
ModelALUMIG-250P
Rated Input Voltage1PH ~ 230V ±15%
MAX.Load Power Capacity10.35KVA
Rated Output250A/26.5V
Max Open Circuit Voltage55V
Effiency80%
Wire-feed Mechanism4 Rollers
Wire Feed Speed Range0~25m/min
Warranty1 year warranty
Dimension770X250X650mm
Weight32KG
Unit PriceUS $ 2 / piece
Download DOC
Update Time2019-11-12
Detail Information
  • /FEATURES

    Quick Specs
    Application:
    Metal Fabrication
    Maintenance and Repair
    Auto Body
    Light Industrial
    Processes:
    MIG,
    Flux-Cored,
    Pulse MIG,
    Double Pulse MIG,
    MMA(Stick)
    Input Power:250P: 230V, 1-Phase
    300P: 400V, 3-Phase
    Amperage Range:250P: 10-250A/300P: 10-300A
    Rated Output at 40℃ (104℉):
    250P: 250A at 26.5V @60% Duty Cycle
    300P:300A at 29V @60% Duty Cycle
    Weight: 32kg

    The advantage of Wave-form Control System

    The latest technology of Waveform Control System with pulsed MIG control mode, can perfectly control the output of
    welding power and get the precision Arc performance. The wire melting droplet transfer cycle is very clear, the welding
    beam is very clean and very few spatters during welding.


    Pulse MIG

    Pulsed MIG varies weld current between peak (high heat) and background (lowheat) current to provide better control of
    heat input, which minimizes warping and burnthrough on thin materials. Pulsed MIG also enables flat,horizontal, vertical
    up, or overhead welding without a slag system.Optimized GMAW-P waveforms are readily available to use on aluminum,
    carbon steel,high strength low alloy steel, stainless steel,and nickel alloys. See NX-2.70


    PULSED MIG

    Pulse MIG precisely controls heat input through the
    1-drop-per-pulsetransfer and offers a stable arc in the
    wide transfer area between short and spray arc.
    Spray arc transfer “sprays” a stream of tiny molten
    droplets across the arc, from the electrode wire to the
    base metal.It produces a characteristic humming
    or buzzing sound.

    Advantages of pulse mig:
    • High deposition
    • Good fusion and penetration
    • Good bead appearance
    • Capability of using larger diameter wires
    • Presence of very little spatter


    General View of Control Panel

    1.SELECT the Memory channel
    2.OPEN the parameter of selected memory channel
    3.STORE the setting to Memory channel
    4. Push to Check Gas
    5.STORE Push to use Synergic Setting
    6.Welding parameter setting,rotary dial
    Adjudtment of the welding current or feeding speed.
    7.Torch Holding Mode
    Push to select the torch handing type:
    1)2T

    2)4T
    3)S4:for aluminiu welding form cold to hot situation.
    8.Welding Process Push to select:
    Welding prcess:MMA,MIG/MAG/CO2,Pulse MIG,
    Double Pulse MIG.
    9.Dia. of Welding Wire
    10.Wire Type
    11.button,throttling effect(arc dynamics)
    12.Function Sequence
    13.Welding Settings


    Synergic MIG

    Synergic pulsed welding mode offers the simplicity of
    single-knob control.The machine will select the correct pulse
    power based on the wire feed speed (WFS) set by the operator.


    S4T Mode

    Begin and end welds with ease and confidence.Hot start
    eliminates incomplete fusion at the beginning of a weld,
    a common issue with aluminum welding.Crater gradually
    decreases weld current at the end of a weld to eliminate
    crater defects.Adjustable pre- and post-flow rates ensure
    that the puddle always has adequate gas coverage.

  • /SPECIFICATIONS

     

    Technical specifications

     

    Item NoALUMIG-250PALUMIG-300P
    Rated Input Voltage1PH ~ 230V ±15%3PH ~ 400V ±15%
    Max. Load Power Capacity10.35KVA12.04KVA
    Rated Duty Cycle(40℃) 60%MIG: 250A/26.5VMIG: Separated Wire-feeder: 300A/29V
          Internal Wire-feeder: 250A/26.5V
     MMA: 250A/28VMMA: 250A/28V
    100%MIG: 200A/24VMIG: 200A/24V
     MMA: 200A/28VMMA: 200A/28V
    Welding Current/Voltage RangeMIG: 30A/15.5V~250A/26.5VMIG: 30A/15.5V~300A/29V
     MMA:30A/20.4V~250A/28VMMA:30A/21.2V~250A/28V
    Open Circuit Voltage55V55V
    Power Factor0.80.85
    Efficiency80%85%
    Pre-Gas Time0-15S0-15S
    Flow-Gas Time0-15S0-15S
    Wire-feed Mechanism4 Rollers4 Rollers
    Wire-feed Speed Range0~25 m/min0~25 m/min
    Wire Spool Capacity300mm (5kg)300mm (5kg)
    Filler Wires Ø (mm) Fe, Ss:0.6~1.2 mm0.6~1.6 mm
    FLUX CORED:0.9~1.2 mm0.9~1.6 mm
    Al:0.8~1.2 mm1.0~1.6 mm
    Dimension770X250X650mm770X250X650mm
    Weight32KG33KG

  • /ACCESSORIES

    For Standard accessories
    For Optional accessories
  • /VIDEOS

     

  • /DOCUMENTS

Product review
  • Loading...
Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service

LET'S STAY IN TOUCH

Get updates on sales specials and more

FOLLOW US

We want to hear from you!