Home / All / Welding Equipment / MIG Welders /

heavy 350 amp mig welder mig arc welding machine PROMIG-350SYN Pulse

heavy 350 amp mig welder mig arc welding machine PROMIG-350SYN Pulse
heavy 350 amp mig welder mig arc welding machine PROMIG-350SYN Pulseheavy 350 amp mig welder mig arc welding machine PROMIG-350SYN Pulseheavy 350 amp mig welder mig arc welding machine PROMIG-350SYN Pulse

heavy 350 amp mig welder mig arc welding machine PROMIG-350SYN Pulse

heavy 350 amp mig welder mig arc welding machine PROMIG-350SYN Pulse
CategoriesMIG Welders
BrandTOPWELL
ModelPROMIG-350SYN Pulse
Rated Input Voltage3PH~380V 15%(50/60Hz)
MAX.Load Power Capacity14.09KVA
Output PropertyCV
Max Open Circuit Voltage70V~80V
Effiency85%
Wire-feed Mechanism4 Rollers
Wire Feed Speed Range0-25m/min
Warranty1 year warranty
Dimension960x420x1400mm
Weight96kg
FOB portNingbo/Shanghai
Terms of PaymentL/C, D/A, D/P, Western Union, MoneyGram, T/T, Paypal
Download DOCpdf icondoc iconxls iconrar icon
Update TimeMar 29,2024
Detail Information
  • PROMIG-350SYN Pulse

    Ultra High Deposition Rate, Ultra High Welding Performance

    • Application:

      Metal fabrication workshops
      Shipyards and offshore industry
      Chemical and process industry
      Steel structure workshops
    • Processes:

      CO₂ /MAG /MIG
      FCAW
      MMA(Stick)
    • Input Power: 380V, 3-Phase

      Rated Output at 40°C (104°F):
      350A at 31.5V @60% Duty Cycle
      Weight: 96KG

    SIMPLE OPERATION

    3 Steps to achieve weld perfection

     

    1. Select operation mode
    2. Select Job-list No.
    3. Adjust welding current
    (always the perfect setting by the synergic function
    using the material thickness)

    Synergy control with job-list

     

    The Job-lists display is easily and intuitively controlled through its graphical user interface.We assembled the perfect welding curve in every Job-No. for highly efficient multi-process welding of carbon steels and stainless steel and aluminum alloys. Operation is easier than ever before.


    HIGH SPEED DOUBLE PULSE MIG PROCESS

    Compared with the traditional DoublePulse, High Speed Double Pulse process can increase the welding speed by about 25%. Welding quality is comparable to TIG process.

    No need to swing, You can easily get a cosmetically pleasing weld seam, with significantly lower and more controller heat input into the workpiece. It results in much lower distortion and less rework, very suitable for welding the thin Aluminum or S.S sheets.
    By High-Speed Double Pulse process, the heat input of arc is alternating, effectively reducing the heat input of base metal. It reduces the occurrence of welding defects such as crack.


    ULTRA LOW-SPATTER IN CO₂ WELDING

    Initial Short Control reduces the amperage immediately after the wire shorts which stabilizes the short, minimizing the spatter caused by wire chattering.
    Neck Control detects the moment droplet detachment begins to neck then quickly reduces the amperage before short releases. Releasing the short at a lower amperage reduces fuse effect energy.
    Stable Transfer Control increased amperage directly after the short release. Adding amperage quickly burns the wire to prevent secondary shorting. The faster burn off creates the droplet faster and reduces total arc time which increases the frequency and provides a crisp and clean arc. For CO₂ process that suppresses weld pool vibration preventing secondary shorting.


    EQUIPPED WITH TOPWELL’S HIGH SPEED-PULSE PROCESS

    Best for high quality and high speed welding of medium and thick plates. In the matter of welding speed, everything starts with the wire. each pulse must melt the largest amount of material. while only on droplet per pulse is transferred for the standard pulse process, high Speed-pulse prcoess achieves an almost constantly flowing metal transfer into the workpiece.

    Benefits:
    ·Higher productivity due to faster we;ding speeds, up to 30% quicker.
    ·Lower heat input for:
    -better weld quality and integrity
    -minimal(angular)distortion
    -minimal dilution of the filler wire alloying elements
    ·Better and deeper penetration depth


    VERTICAL-UP WELDING AS EASY AND FAST AS NEVER BEFORE

    The HSP optimised for fillet welds (FW) completed using PF welding (in vertical up position); can also be used to great benefit in other weld positions. For Topwell ProMIG Series, HSP is approx 70 % faster, an enormous progress for everyone welding a vertical seam. A whole new level! No need to swing! No undercuts or other defects! The speed of PF welding by HSP is twice that of the traditional pulse welding.


    IMPROVED OPERATION PROCESS & CONTROLS

    Initial Arc control

     

    We control the arc energy by welding waveform, so the success rate of arc ignition can be improved and quickly establish a molten pool.

    Burn Back control

     

    Adjustable time delay between turning off the arc and the wire feed to prevent wire sticking to the puddle.

    Burn Back control

     

    Adjustable time delay between turning off the arc and the wire feed to prevent wire sticking to the puddle.

    Initial Arc control

     

    We control the arc energy by welding waveform, so the success rate of arc ignition can be improved and quickly establish a molten pool.


    IMPROVED OPERATION PROCESS & CONTROLS





  • Item No PROMIG-350SYN Pulse
    Mains voltage(V) 3PH~380V ±15%(50/60Hz)
    Max.Load Power Capacity 14.09KVA
    Output Property CV
    Open Circuit Voltage 70V
    Voltage Synergy/NO
    Welding range(A) DC 10~350
    Process CO₂/MAG/ MIG/FCAW-G
    60% 30A/15.5V~350A/31.5V
    100% 30A/15.5V~300A/32V
    Power Factor 0.92
    Efficiency 85%
    Wire feed unit 4 rollers
    Wire feed speed range 0~25m/min
    Wire Spool Capacity 300mm (15kg)
    Weldable wires steel(mm) 0.6~1.6 mm
    Weldable wires Aluminum(mm) 1.0~1.6 mm
    Flux Cored 0.8~1.6mm
    Standard EN 60974-1
    Protection class(EN 60529) IP23S
    Insulation class F
    Designation CE,ROHS
    Dimension 960x420x1400mm
    Weight 80KG
    Water-cooling Unit: WC-150
    Operating Voltage 230V 50/60Hz
    Rated Power 260W
    Cooling Power 1.5KW(1L/MIN)
    Maximum Pressure 0.3MPA/60HZ
    Recommended Cooling Liquid 20%~40% ethanol/water
    Tank Volume 6.5L
  • For Standard accessories
    3

      

      

    MIG torch:MIG-24


      

      

    Earth clamp

    For Optional accessories
    3

      

      

    BINZEL MB EVO PRO 501D


      

      

    Argon gas regular
    or CO₂ gas regular with heater

     

      

                                                 

  • Q:Are you a factory or a trading company?

    A: We are factory with more than 10 years manufacturing experience and we provide perfect OEM and after-sale service.

    Q:How can I pay my order?

    A: We accept T/T, Western Union, Alibaba Trade Assurance payments. For those orders less than 1000USD, we accept PayPal to pay.

    Q:How about your warranty?

    A: We offer 3-year product life guarantee ,and a generous 1 year warranty on al purchases that begins with the bill of lading.

    Q: Do you have a CE certificate?

    A: For every model of machine, it has a CE certificate.

    Q:How can I get the quotation?

    A: We usually quote within 24 hours after we get your inquiry. If you are urgent to get the price,please send the message on trade management or call us directly

    heavy 350 amp mig welder PROMIG-350SYN Pulse

  •                     

ANY COMMENTS? YOU ARE WELCOME TO LEAVE MESSAGE TO US!
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Review
  • Loading...