MAX 200
MAX 200MAX 200MAX 200MAX 200MAX 200

MAX 200

Dual Air system Plasma Cutting Plasma Source MAX 200 with Oxygen Process M.S./S.S./AL
CategoriesMAX Series
BrandTOPWELL
ModelMAX 200
Input Voltage3PH ~ 400V ±15%
Duty Cycle Rating 40℃(105℉)200A@100%
Plasma GasO2; Air; N2; H35
Shield GasO2; Air; N2
FOB portningbo/shanghai
Terms of PaymentWestern Union, T/T
Download DOCpdf icon
Update TimeMar 29,2024
Detail Information
DETAILS
MAX200
Extra-Definition, Maximized productivity across a broad range of application needs, from very thin to heavier thicknesses.

Cutting Capacity
Mild Steel Cut Capacity
Thickness
Production Pierce
25mm
Maximum Cutting Capacity
50mm
Stainless Steel Cut Capacity
Thickness
Production Pierce
25mm
Superior Cutting Performance
Superior Cutting Performance
Optimized gas parameters are set and controlled by the software. With Oxygen/Air/N2/H35 plamsa gas, the MAX series plasma cutting system achieves impressive cut speeds, consistent cut quality and exceptional consumable life.
Maximized Productivity


· MAX Series provides faster cutting speed to maximize productivity.
· Engineered with 100% duty cycle for the most demanding production environments.
Maximized Productivity
Long-life Consumables
Long-life Consumables


The MAX200 system ramps current and gas flow up and down in a tightly controlled manner to reduce electrode and nozzle erosion.

Reducing electrode and nozzle erosion enables more consistent cut quality over a longer period of time, while providing a significant reduction in operating cost.

· Ignitions per cutting time in seconds
· 20 second duration
· MAX200: 810 times
Efficient Gas Supply



The MAX200 plasma systems significantly increase the efficiency of gas and reduce the gas consumption.

· Cutting Current: 200A
· Gas consumption: 
  Plasma Gas: 60 l/min
  Shielding Gas: 75 l/min
Efficient Gas Supply
Bevel Cutting Technology
Bevel Cutting Technology





Bevel Cutting Technology is a performance application for mild steel. Factory tested and easily implemented, it takes the guesswork out of the plasma bevel-cutting process. With Bevel Cutting Technology, setups for new jobs are quick and results are accurate and consistent.

· 1 iteration
· Using True Bevel
· Acceptable part and ready to start production
Refined Torch System






· Vented nozzle technology aligns and focuses the plasma arc.
· High Definition Cutting enables powerful precision cutting for superior quality and consistency on mild steel.
· High Definition delivers superior quality to thin stainless steel cutting.
Refined Torch System
TP300MAX Plasma Torch

VIDEO

SPECIFICATIONS
Machines
Product Name
MAX200
Cut angle(ISO 9013 range*)
2
Weldability
Ready to weld
Plasma Gas
O2; Air; N2; H35
Shield Gas
O2; Air; N2;
Product Weights & Dimensions
Dimensions(L*W*H)
960*420*1100mm
Net Weight
156KG
Basic Specification
Input Voltage
380V/400V, 3PH, 50/60Hz
Input Power
50KVA
Rated Output Voltage
50~200VDC
Rated Output(40℃) 100%
200A
Open Circuit Voltage (OCV)
430VDC
* ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
SPECIFICATION

YOU MAY ALSO NEED
TP300MAX consumable Kit
TP300MAX consumable Kit
TP260XD
TP260XD
TP260XD Consumable Kit
TP260XD Consumable Kit
Gas Console
Gas Console (H35/N2)
Gas Console
Gas Console (Air/Air)

ANY COMMENTS? YOU ARE WELCOME TO LEAVE MESSAGE TO US!
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Review
  • Loading...