Home / All / Welding Equipment / TIG Welders /

DC Tig 3 phase welding equipment PROTIG-400CT

DC Tig 3 phase welding equipment PROTIG-400CT
DC Tig 3 phase welding equipment PROTIG-400CTDC Tig 3 phase welding equipment PROTIG-400CTDC Tig 3 phase welding equipment PROTIG-400CTDC Tig 3 phase welding equipment PROTIG-400CTDC Tig 3 phase welding equipment PROTIG-400CT

DC Tig 3 phase welding equipment PROTIG-400CT

The PROTIG-400CT is designed for heavy industrial usage. It is built by IGBT model
CategoriesTIG Welders
BrandTOPWELL
ModelPROTIG-400CT
Input Voltage3PH ~ 400V ±15%
Rated Output(40℃) 60%400A/26V
Output Range20A/10.8V~400A/26V
FOB portningbo/shanghai
Terms of PaymentWestern Union, T/T
Download DOCpdf icondoc iconxls iconrar icon
Update TimeMar 29,2024
Detail Information
DETAILS
Powerful output, Heavy duty for industrial,
Outstanding performance
PROTIG-400CT

Powerful output - 400A@60% Duty cycle. 

Advanced Pulse control  - Minimize heat input on thin materials, and provide for a faster freezing weld puddle for uphill welding on curved surfaces such as process piping. The TIG pulse also helps moderate filler metal deposition for consistent bead appearance. 

High-Frequency start - Makes it easy to establish an arc under a variety of conditions. 

Hot Start & Arc Force - Makes it easy to start and powerful arc in MMA welding

symbol
Advanced Pulse TIG
Conventional Pulse TIG
Conventional Pulse TIG
Conventional Pulse TIG
Typically from 0.2 to 10 PPS. Provides a heating and cooling effect on the weld puddle and can reduce distortion by lowering the average amperage. This heating and cooling effect also produces a distinct ripple pattern in the weld bead. The relationship between pulse frequency and travel speed determines the distance between the ripples. Slow pulsing can also be coordinated with filler metal addition and can increase overall control of the weld puddle.
High Frequency Pulse TIG
High Frequency Pulse TIG
High Frequency Pulse TIG
In excess of 40 PPS, Pulsed TIG becomes more audible than visible causing increased puddle agitation for a better as-welded microstructure. Pulsing the weld current at high speeds between a high Peak and a low Background amperage can also constrict and focus the arc. This results in maximum arc stability, increased penetration and increased travel speeds.
 Pressure Pipelines Application
Pressure Pipelines Application

ProTIG-400CT + Cold Wire Feeder + Carriage

This system is a solution for pressure pipelines. It is 400A @ 60% Duty Cycle. With the precise arc control, it delivers deep penetration and high-quality welding seams.

Pressure Pipelines Application
Pressure Pipelines Application

General View of Control Panel
1. Remote: used for foot pedal or Remote torch.
    Local: adjusted Currents by face panel
2. 2T/4T holding mode or Spot Welding mode selection
3. Pulse ON/OFF selection.
4. Process selection
5. ARC FORCE/HOT START
6. Memory with capacity of 10 sets parameters
7. Function Sequence
8. Encoder Control
9. Select welding parameters button

SPECIFICATIONS
Machines
Product Name
ProTIG-400CT
Machines Processes
Stick (SMAW)
TIG (GTAW)
Pulsed TIG (GTAW-P)
Product Weights & Dimensions
Dimensions(L*W*H)
960x420x900mm
Net Weight
70KG
Basic Specification
Input Voltage
3PH ~ 400V ±15%
Input Power
TIG: 14.39 KVA
MMA: 14.21 KVA
Output Range
TIG: 20A/10.8V~400A/26V
MMA: 20A/20.8V~315A/32.6V
Rated Output(40℃) 60%
TIG: 400A/26V
MMA: 315A/32.6V
Polarity
DC

YOU MAY ALSO NEED
Foot Pedal
Foot Pedal
Cold Wire Feeder
Cold Wire Feeder With Auto-Feeding Torch
T4W
T4W

ANY COMMENTS? YOU ARE WELCOME TO LEAVE MESSAGE TO US!
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Review
  • Loading...