Home / All / Welding Equipment / All products /

CUT-40Di/40MV

CUT-40Di/40MV
CUT-40Di/40MVCUT-40Di/40MVCUT-40Di/40MVCUT-40Di/40MVCUT-40Di/40MV

CUT-40Di/40MV

CUT-40 is designed based on the full digital control system, specifically for the handyman or trades man that requires high...
CategoriesAll products
BrandTOPWELL
Modelinverter welding machine Plasma cutter 40A
Rated Input Voltage1PH ~ 230V ±15%
Rated Output Currant25-40A
Max. Load Power Capacity6KVA
Effiency80%
Warranty1 year warranty
Dimension450*210*350mm
Weight12KG
Unit PriceUS $ 2 / piece
Download DOCpdf icondoc iconxls iconrar icon
Update TimeApr 17,2024
Detail Information
  • /FEATURES

    Quick Specs
    Light Industrial Application:
    Home workshop
    Metal fabrication workshops
    Light fabrication
    Repair and maintenance
    Processes:
    Mild Steel
    Stainless Stee
    Copper
    Aluminum
    Input Power:230V
    or 115/230V, 1-Phase
    Amperage Range: 25-40A
    Rated Output at 40℃ (104℉):
    40A at 96V @60% Duty Cycle
    Weight:12KG

    General View of Control Panel

    CUT-40Di-40MV-▏Plasma-Cutters_03

    Control Panel Parameter Values
    1.Ammeter/Voltmeter Display
    2.Encoder Control
    3.Gas test
    4.Collective interference signal light
    5.Power LED





    Steel Cutting Capability (Thickness to scale.)

    CUT-40Di

    Capacity Thickness
    Quality Cutting Capacity (Hand-held) 8mm
    Max Cutting Capacity (Hand-held) 16mm

    CUT-40MV

    Capacity Thickness
    Quality Cutting Capacity (Hand-held) 8mm
    Max Cutting Capacity (Hand-held) 16mm




    Plasma cutter test performance


    Non-HF Arc Ignition system

    Torches with pilot arc cut in without high frequency.

    CUT-60H-▏Plasma-Cutters_11CUT-60H-▏Plasma-Cutters_13CUT-60H-▏Plasma-Cutters_15CUT-60H-▏Plasma-Cutters_17

    Torch off.

    By pressing the trigger the
    torch will be fed by the
    current thus causing a
    temporary short circuit
    betweenelectrode and tip.

    The air then pushes up the
    small piston, thuscreating,
    between the electrode and
    the tip, the distance need
    -ed to strike the pilot arc.

    By positioning the torch on
    the part to be cut,
    theplasma arc will strike.


    Less electromagnetic disturbance, with consequent absence of problems for any electronic, radio, television, telephone
    and computer systems in the vicinity of the cutting positions.
    Less electric stress on the torch - and on the respective connecting cables - due to the absence of the high voltage
    necessary for striking the arc Greater simplicity in comparison with other torches(without high frequency) on the market,
    with a consequent decrease of the risks of jamming in the mechanical pneumatic movement for striking the arc.
    Subject to wear (electrode, tips, nozzles, diffusers etc.), thanks to the better cooling of the torch obtained by reducing
    the insulating thicknesses (without endangering the safety parameters).




  • /SPECIFICATIONS

     

    Technical specifications

     

    Item NoCUT-40DiCUT-40MV
    Rated Input Voltage1PH ~ 230V ±15%1PH ~ 115/230V ±15%
    Max. Load Power Capacity6KVA6KVA
    Rated Duty Cycle(40℃,105℉) 60%@40A100%@25A
     60%@40A100%@25A
    Rated Output Currant25-40A25-40A
    Rated Output Voltage96V96V
    Rated Open-circuit Voltage280V280V
    Power Factor0.80.73
    Efficiency80%80%
    Required Air Pressure0.3~0.5MPa0.3~0.5MPa
    Quality Cutting Capacity (Hand-held)8mm8mm
    Max Cutting Capacity (Hand-held)16mm16mm
    Dimension (LxWxH)410X185X310mm410X185X310mm
    Weight (KG)12 KG12 KG

  • /ACCESSORIES

    For Standard accessories
    For Optional accessories
  • /VIDEO

     

    High quality cutting performance.
    Accessories:Trafimet CB-50 torch

     

  • /DOCUMENTS

ANY COMMENTS? YOU ARE WELCOME TO LEAVE MESSAGE TO US!
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Review
  • Loading...